Tube plate flange processing CNC gantry moving plate high-speed drilling machine 5000mm*5000mm*250mm

Production Description:      PHM5050C/2 top manufacturer CNC drilling machine for steel plates .Machine Purpose:     Mainly Drilling tube sheet plates and flanges, the drilling hole diameter is less thanφ80mm. The main function includes drilling holes, reaming, boring, tappin

Featured Products

Production Description:

      PHM5050C/2 top manufacturer CNC drilling machine for steel plates .

Machine Purpose:
     Mainly Drilling tube sheet plates and flanges, the drilling hole diameter is less thanφ80mm. The main function includes drilling holes, reaming, boring, tapping, chamfering, and milling. It's applicable to take both carbide drill bit and  drill bit. The CNC control system's operation is convenient and easy. The machine has very high work accuracy.

Tubesheet Flange Fabrication CNC Gantry Movable Plate High-Speed Drilling Machine 5000mm*5000mm*250mm
Machine's Supply Range:
 
No.NameQty.
1Machine Frame1 set
2Column1 set
3Cross beam 1 set
4Worktable 1 set
5Ram-type drilling Spindle and headstock2set
6Hydraulic System1 set
7Electrical Control System1 set
8Centralized Lubrication System1 set
9Scrap Removal System1 set
10Cooling System1 set
11Pneumatic system1 set
 
Machine Features:


      The machine frame body and cross beam are in welded fabricated structure, after enough aging heat treatment, with very good accuracy. The work table, transversal sliding table and ram all are made from cast iron.
      Two sides'dual servo driving system at X axis assures the gantry's parallel accurate movement, and the good squareness of Y axis and X axis.
      The work table is made from cast iron, assures stable performance.

      The Drilling spindle is rigid high precise BT50 type with inner cooling system, and easy to change tools. The spindle speed is 30~3000r/min.
      At the two sides of the work table there are total two plate-chain type scrap removal device, the scrap and cooling liquid can be collected to the device, and the coolant can be recycling used.
      The machine has two cooling ways - inner cooling and outside cooling, enough pressure and flow rate, and there is coolant level inspection warning components, which assures enough lubricating and cooling for the drilling tool.
      The machine has automatic lubricating system, provides enough and reliable lubricating for the key movement points, such as guide rail, ball screw and roller bearings, which assures the key movable components' lifetime.
      The CNC Control system is Siemens828D , with powerful function, automatic CAD-CAM programming, easy operation, automatic warning and error compensation.
      The key outsourced components, such as linear roller guide rail, ball screw, servo motor and servo driver, spindle, CNC control system, hydraulic pump, valve and cooling pump, etc., all are from world famous brand, so the machine has very high reliability and stable performance.

Main technical specifications:
 
ItemNameValue
Maximum Plate SizeL x W5000×5000 mm
Maximum Thickness250mm(can be extended to 380mm)
Work TableT Slot Width28 mm(standard)
T Slot DirectionY Axis
Loading Weight3 tons/square meter
Drilling SpindleMaximum Drilling Diameterφ80 mm
Drilling spindle's Rod Length vs. Hole diameter≤10,(Crown Diamond)
Maximum Tapping screw M30
RPM30~3000 r/min
Spindle TapeBT50
Spindle motor power2×37kW
Maximum Torque  n≤750r/min470Nm
Distance from Spindle bottom surface to the worktable280~780 mm
(adjustable as per material thickness)
Gantry Longitudinal Movement (X Axis)Max. Travel4000 mm
Movement speed along X axis0~16m/min
Servo motor power of X axis2×3.3kW
Spindle Transversal Movement
(Y Axis)
Max. Travel4000mm
Movement speed along Y axis0~16m/min
Servo motor power of X axis2×2.7kW
Spindle Feeding Movement
(Z Axis)
Maximum distance between two drilling headstocks4000 mm
Feeding speed of Z axis0~10m/min
Servo motor power of Z axis2×4.3kW
Positioning accuracyX axis,Y axis0.08mm/full travel
Repeatable positioning accuracyX axis,Y axis0.04mm/full travel
Hydraulic systemHydraulic pressure/Flow rate6MPa /22L/min
Hydraulic pump motor power5.5 kW
Pneumatic systemCompressed air pressure0.5 MPa
Scrap removal and Cooling systemScrap removal tpePlate chain
Scrap removal Nos.2
Scrap removal speed1m/min
Motor Power2×0.75kW
Cooling wayInner cooling + Outside cooling
Max. Pressure2MPa
Max. Flow rate60L/min
Electronic systemCNC control systemSiemens 828D
CNC Axis Nos.6
Total powerAbout 110kW
Overall DimensionL×W×HAbout 9.8×8.7×4.1m
Machine weight About 50t

Key outsourced components list:
 
No.NameBrandCountry
1Roller linear guide railHiwin/PMIChina Taiwan
2CNC control systemSiemensGermany
3Feeding servo motor and servo driverSiemensGermany
4Precise spindleSpintech/KenturnChina Taiwan
5Hydraulic valveYuken/JustmarkJapan/China Taiwan
6Oil pumpJustmarkChina Taiwan
7Automatic lubricating systemHergJapan
8Button, Indicator, low voltage electronic componentsABB/SchneiderGermany/France
Note: The above is our fixed supplier. It's subject to be replaced by same quality components of other brand if the above supplier can't supply the components due to any special matter.

Free Accessories list:
 
No.NameSizeQty.
1Optical edge finder 1 piece
2Inner hexagon wrench 1 set
3Tool holder and pull studΦ40-BT502 pcs
4Tool holder and pull studΦ20-BT501 piece
5Spare paints--2 kegs

Work Environment:

    1).Power supply:                          3 phase 5 lines     380±10%V    50±1HZ
    2).Compressed air pressure:       ≥0.5MPa
    3).Temperature:                           0-40°C
    4).Humidity:                                   ≤75%

Our company:


    Shandong FIN CNC MACHINE CO., LTD. is always focusing on our ultimate goal - to secure and increase our customer's productivity - has made us the leader in China market in the manufacture of machines for processing angle bar, beam channel profiles, steel plates, tubesheet and flanges, mainly serving for fabricating iron towers, steel structure, heat exchangers, boilers, bridges, and trucks.Strong R & D center with 30 engineers team, 24 years of experience from year 1997, 280 staff, plant area about 270,000 sqm., very harsh quality control of every component and the whole machine, about 40 million US dollars sales turnover per year.FIN CNC machines' market share in China is around 70% and exported to 50+ countries across globe market. All top ranked tower manufacturers, steel structure fabricators and power station makers, bridge/railway manufacturers, truck makers are our clients.
     Main products: CNC Angle Line, CNC Beam Drilling Sawing Machine, CNC Plate Drilling Machine, CNC Rail Processing Machine, CNC Tubesheet Flange Drilling Machine, Truck beam plate punching machine, etc..
     One measure of the outstanding quality of our machines is their longevity: many FIN machines have been in operation for more than 17 years! Many clients are continually placing repeated orders which verified well our machines' perfect quality and reliable performance.
     The company drafted many China national standards for CNC angle line machine and CNC beam drilling sawing machine and CNC plate drilling machine.

Tubesheet Flange Fabrication CNC Gantry Movable Plate High-Speed Drilling Machine 5000mm*5000mm*250mm
Tubesheet Flange Fabrication CNC Gantry Movable Plate High-Speed Drilling Machine 5000mm*5000mm*250mm
Tubesheet Flange Fabrication CNC Gantry Movable Plate High-Speed Drilling Machine 5000mm*5000mm*250mm
Tubesheet Flange Fabrication CNC Gantry Movable Plate High-Speed Drilling Machine 5000mm*5000mm*250mmTubesheet Flange Fabrication CNC Gantry Movable Plate High-Speed Drilling Machine 5000mm*5000mm*250mm
Tubesheet Flange Fabrication CNC Gantry Movable Plate High-Speed Drilling Machine 5000mm*5000mm*250mmTubesheet Flange Fabrication CNC Gantry Movable Plate High-Speed Drilling Machine 5000mm*5000mm*250mm
Tubesheet Flange Fabrication CNC Gantry Movable Plate High-Speed Drilling Machine 5000mm*5000mm*250mmTubesheet Flange Fabrication CNC Gantry Movable Plate High-Speed Drilling Machine 5000mm*5000mm*250mmFAQ:

    1. When can you arrange shipment?

    For machines available in stock, the shipment can be arranged within 15 days after getting advance payment or L/C;
For machines non available in stock, the shipment can be arranged with 60 days after getting advance payment or L/C.

    2. What can you do if my machines have problems?

    1) We can send you free components if machines are in warranty period;
    2) 24 hours service on line;
    3) We can assign our engineers to serve you if you want.

    3. Do you provide machine operation training?

Yes. We can send professional engineers to the working site for machine's installation, commissioning and operation training.

    4. Which machine model shall I choose when I purchase from you?

Please share us your material size and your processing request, then we will recommend our machine most suitable and most cost effective for your work demand.

    5. What's your machine's market share in China?

Our market share in China is about 70%+, and we've exported to 50+ countries across the globe market, since year 1998.

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours