Features
VMC650 is designed for machining complicated mold profile, automotive parts, and housing parts. It has distinguished advantage in machining mold, especially the small size mold. It has big torque output at low speed range, which is suitable for high strength steel and high temperature alloy steel which are difficult for machining.
Suitable to machine large machinery parts, automative part, mold etd;
With Taiwan high speed spindle to 8000rpm;
Economic type;
High accuracy; High speed; High rigidity; Low noise
FAQ
1. How can I choose the most suitable machines ?
A: You can choose the exact model by yourself. Or you can tell us your specifications, to let us choose the best model for you, too.
You can also send us the product drawing, and we will choose the most suitable machines for you.
.
2. When do you deliver?
A: It depends on the machine and model you choose. Mostly 1.5 months - 3 months. All machines are brand new, made according to your order. Occasionally there will be a few machines available from stock. You can send us a message or mail to check exact delivery time.
3. Is machine tested ?
A: The accuracy, noisy will be tested according to China GB standard.
4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.
5. What's the Payment Terms ?
A : T/T 30% down payment when order ,70% balance payment before shipment ;
Irrevocable L/C at sight also acceptable but it will subject additional bank fee.
6. Do you accept cash or L/C?
A: We accept T/T or L/C, all through banking system. We do not accept cash, 'cause we are an official registered company that all payment must go through official bank account.
7. What's the MOQ?
A: 1 set (Only some low cost machines will be more than 1 set)
8. How is the warranty?
A: 12 months after shipment date
9. If I have a problem setting up/ getting it running problem, will you be available by email to assist in solving the problem.
A: Video technical support, online service, we can answer you in 24 hours.
VMC650 is designed for machining complicated mold profile, automotive parts, and housing parts. It has distinguished advantage in machining mold, especially the small size mold. It has big torque output at low speed range, which is suitable for high strength steel and high temperature alloy steel which are difficult for machining.
Suitable to machine large machinery parts, automative part, mold etd;
With Taiwan high speed spindle to 8000rpm;
Economic type;
High accuracy; High speed; High rigidity; Low noise
| NO. | ITEM | VMC650 | |
| 1 | Table size L(mm)×W(mm) | 900X360 | |
| 2 | T slot QTY /width/interval distance(mm) | 3-14-120 | |
| 3 | Maximum load(kg) | 400 | |
| 4 | X travel (mm) | 650 | |
| 5 | Y travel (mm) | 380 | |
| 6 | Z travel (mm) | 480 | |
| 7 | Spindle nose to table (mm) | 100-600 | |
| 8 | Spindle center to column (mm) | 410 | |
| 9 | Spindle taper | BT40 | |
| 10 | Max. spindle speed (rpm) | 8000 | |
| 11 | Main motor (kW) | 7.5 | |
| 12 | Feed motor | X torque(N.M) | 6 |
| Y torque(N.M) | 7.7 | ||
| Z torque(N.M) | 7.7 | ||
| Max. install size | 7.5 | ||
| 13 | Rapid moving speed (m/min.) | 12/12/10 | |
| 14 | Cutting speed (mm/min) | 1-6000 | |
| 15 | Ball screw (diameter mm/pitch )mm | 32/10 | |
| 17 | Accuracy | Positioning accuracy (mm) | 0.016 |
| Repeatability accuracy (mm) | 0.008 | ||
| 18 | Tool changer | Funnel type (optional ) BT40 | 10 or 12 |
| 19 | Air pressure Mpa | 0.6 | |
FAQ
1. How can I choose the most suitable machines ?
A: You can choose the exact model by yourself. Or you can tell us your specifications, to let us choose the best model for you, too.
You can also send us the product drawing, and we will choose the most suitable machines for you.
.
2. When do you deliver?
A: It depends on the machine and model you choose. Mostly 1.5 months - 3 months. All machines are brand new, made according to your order. Occasionally there will be a few machines available from stock. You can send us a message or mail to check exact delivery time.
3. Is machine tested ?
A: The accuracy, noisy will be tested according to China GB standard.
4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.
5. What's the Payment Terms ?
A : T/T 30% down payment when order ,70% balance payment before shipment ;
Irrevocable L/C at sight also acceptable but it will subject additional bank fee.
6. Do you accept cash or L/C?
A: We accept T/T or L/C, all through banking system. We do not accept cash, 'cause we are an official registered company that all payment must go through official bank account.
7. What's the MOQ?
A: 1 set (Only some low cost machines will be more than 1 set)
8. How is the warranty?
A: 12 months after shipment date
9. If I have a problem setting up/ getting it running problem, will you be available by email to assist in solving the problem.
A: Video technical support, online service, we can answer you in 24 hours.