- Equipment Features
- It is used for all kinds of CNC drilling and milling profiles and plates in aluminum, copper, PVC, and plates;
- With high precision linear guide, ball screw, gear, rack, and inlet servo system, which ensure it runs smoothly, positions and machines accuracy.
- With the high-speed and automatic tool-changing spindle from Italy, it has stable and reliable performance.
- The rotary table can convert between the three positions in -90 degrees, 0 degrees and +90 degrees, which realizes that a clamping can finish three surface milling.
- Both ends of worktable have a positioning device respectively, it can realize the dual processing of short profiles, and improve the work efficiency greatly.
- With semi closed hood and connected at the bottom tray, it has high security, which avoid the pollution of aluminum scraps at the work area effectively, and creates a good working environment.
- The intelligent CNC system and the simple, intuitive interface makes the operation more convenient.
- Main specification and technical parameter
X-axis range | 3500mm |
Y-axis range | 450mm |
Z-axis range | 350mm |
X-axis moving speed | 0~60m/min |
Y-axis moving speed | 0~30m/min |
Z-axis moving speed | 0~30m/min |
Spindle power | 7.5kw/9kw |
Spindle max rev | 24000r/min |
Spindle taper | ISO30 |
Tool type | Horizontal type |
Tool magazine capacity | 3pcs |
Cooling type | atomization cooling(or water cooling) |
Quantity of clamp | 4 |
Clamp moving type | manual |
open mode of shield | pneumatic lifting |
Power supply | 380V/50Hz |
Operation air pressure | 0.5-0.8Mpa |
Area | 4500mm X 2300mm |
Weight | 2500kg |