We earn a commission for products purchased through some links in this article.

Learn the secret to cleaning everything from tiles to wood, plus expert advice on carpet cleaning. Multifunctional Shoe Brush

You've dusted and wiped your surfaces, tidied up your belongings and vacuumed your home — all that's left is cleaning the floor!

Depending on what kind of floor you have, you'll need to use different products and approach the task in a different way. If you're unsure, read our handy guide below to keeping your floors sparkling clean...

Keeping on top of dust, dirt and grime is better than letting it build up and having to spend longer doing a big clean. One way you can do this is by using doormats at entrances, taking your shoes off when you enter the house and grooming your pets often.

It's always a good idea to wipe up any spills immediately if possible, especially on porous surfaces like marble. A product like Zoflora Biodegradable Antibacterial Floor Wipes is useful to have to hand for quick clean ups.

Vacuum, dust or wipe with a lightly dampened mop – never use soap-based detergents, as they can leave a dull film on the floor, and avoid over-wetting. Don’t use wax polish either, as this will make the floor slippery.

To remove marks and stains, use a dilute solution of water and vinegar. Don't be tempted to use abrasive cleaners, such as nylon scouring pads or steel wool, as they can scratch laminate.

Stubborn marks, such as shoe polish, can be removed with nail polish remover containing acetone, or other mild solvents. Trusty old WD-40 is also effective.

To protect the floor, put felt pads underneath furniture legs and drip trays under plant pots.

GHI Tip: Vacuum or sweep all types of hard floors regularly to prevent the surface being scratched by grit, and remove shoes at the front door.

Thankfully, these need minimal maintenance! Sweep and wash with a mild detergent solution, before rinsing with clean water. Never use wax polish – the tiles will become slippery.

You could also try a steam cleaner. They're are a quick and effective option for cleaning sealed floors and tiles, and they only need water to get the job done.

How to clean terracotta tiles

For the first year after installation, terracotta tiles mature. Most floor suppliers stock a special cleaner, sealant and polish to use on terracotta tiles, so be sure you use the products recommended on yours.

Wipe factory-sealed cork tiles with a damp mop, using a washing-up liquid solution. For an extra layer of protection, especially in high-traffic areas like the bathroom and kitchen, apply an acrylic or polyurethane sealant.

Never over-wet cork floors, and take care not to damage the seal or protective coatings by dragging appliances or furniture across them.

GHI Tip: Scuff marks on your skirting boards? Squirt them with WD-40 and wipe them away with a soft cloth.

Sweep with a soft brush or vacuum, then wipe with a damp mop, using a mild detergent. Rinse thoroughly after wiping. To remove scuff marks, use a cloth dipped in neat washing-up liquid or white spirit, then rinse off.

Stone is susceptible to staining, so it should always be protected with a resin sealant. To clean sealed stone, vacuum it thoroughly, before mopping with a mild detergent solution.

To remove grease or oil, use a proprietary spot-treatment stain remover for stone.

How to clean wooden floors

Sealed floors need only to be swept and damp-mopped. Don't use too much water or the wood could swell and split.

Unsealed and waxed floors should be swept regularly and occasionally re-polished. Use wax sparingly, as any excess will leave a tacky residue and attract dirt, then buff well. Should worn patches appear on the surface, apply a non-slip floor polish.

GHI Tip: Never varnish a waxed floor – it won't dry!

On a waxed floor, polish and dirt builds up over time. The only way to clean it is to remove the wax and start again. Use a cloth moistened with white spirit. Let it soak in, and as the wax and dirt begin to dissolve, wipe it away with crumpled newspaper. Scrub obstinate parts by hand, or with abrasive pads on a floor polisher.

Once all of the polish has been removed, damp-mop with clean water. Leave it to dry completely before applying new polish, one small section at a time.

For protecting your wooden or parquet flooring, we recommend Dr Beckmann Hardwood & Parquet Floor Cleaner. It nourished our boards and brought slightly faded ones back to life.

Sweep or vacuum to remove grit and dust. Clean with a mop or cloth dampened with a floor cleaner or detergent solution. Use water sparingly. Rinse after washing.

Stubborn marks can be removed by rubbing lightly with a dampened fine nylon pad.

If you own a carpet cleaning machine, this is the best way to clean your floor. If not, you can still do a good job without one.

Start by spot-treating any stains. We like the Dr Beckmann Carpet Stain Remover for removing stains. Simply use it according to the manufacturer's instructions, but remember that it's always best to target stains quickly. The longer you leave before removing a stain, the harder it will be.

Next, you'll want to tackle the carpet with your vacuum. Once you've been over it once, use your vacuum accessories to clean hard-to-reach areas. Use the crevice tool to vacuum the edges of your carpet and under radiators — this will help to prevent black lines forming around the skirting board. If your carpet is particularly thick, use the turbo brush (or power brush) to collect stubborn dirt and pet hairs.

Wooden Shoe Brush GHI Tip: Remove any annoying indents and impression marks left by furniture by rubbing an ice cube over the affected area.